About Our Auto Collision Shop in Corcoran
We are an auto collision shop that pays attention to the parts of a repair you never see: the seam sealer along a replaced panel, the primer on bare metal, the clip that holds a bumper cover tight. Those details decide whether your car still looks right years from now.


Why the hidden steps get our attention
Most repairs look fine the day they leave a shop. The difference shows up later: paint lifting at the edge of a blended panel, rust blooming under a weld, a bumper cover that rattles because a broken mounting tab was glued instead of replaced. Those failures come from shortcuts taken during the repair, not from the collision itself, so we built the way we work around avoiding them.
In practice that means removing trim, lights and door handles instead of masking around them, so paint and clear coat wrap the panel edges properly. It means cleaning bare steel and treating it before any filler or primer goes on. When a hit could have moved the structure, it means measuring the body against factory dimensions rather than judging by panel gaps alone.
We also explain the why. Each line on the estimate says what part or operation it covers and why it is needed. If a panel can be repaired rather than replaced, we tell you. If hidden damage turns up once a bumper or fender comes off, we show you photos before the plan changes.
How we work on your car
- 01
Disassembly before paint
We take off the parts that sit against a painted panel. Masking leaves a hard tape line that can start to peel after a few hot summers, while a fully painted edge stays sealed.
- 02
Corrosion protection at every weld
Welding burns off factory coatings on both sides of the metal. We restore them with weld-through primer and cavity wax inside closed sections, then seal seams to match the original pattern.
- 03
Matching the color, not just the code
A paint code is only a starting point. Factory color varies from plant to plant and shifts with sun exposure, so we spray test cards and blend into neighboring panels when the match calls for it.
- 04
Straight answers on the estimate and the claim
You get a written, line-item estimate. If you are filing an insurance claim, we explain how supplements work when hidden damage is found and what documentation we send your adjuster, without acting as the adjuster ourselves.
A Corcoran shop for the surrounding area
Our shop is in Corcoran, and many of the vehicles on our floor come up from Pixley and Tipton or over from Hanford, Armona and Tulare. All of the work is done here on site, including collision repair, frame straightening, dent repair, bumper repair and paint and refinishing. Start with a phone call so we can hear what happened to your car and pick a day for you to drop it off.
- Corcoran
- Tipton
- Tulare
- Hanford
- Armona
- Pixley
Talk through the damage with us
Tell us what happened and where the car was hit. We will explain what we check during the estimate and how the repair would likely go from there.